2025-08-06How to Connect an RF Power Combiner

First, confirm the device's interface type to ensure it matches the interface of the RF signal source, load, and other devices to be connected...

2025-08-06What is the Function of an RF Power Combiner

An RF power combiner effectively combines the power of multiple RF signals to form a single, more powerful signal. In RF systems, a single power source often cannot meet high-power output requirements....

2025-08-05How to Improve Power Combining Accuracy in RF Power Combiners

Ensure that the signal path lengths at each input port are consistent to minimize phase deviation caused by path differences....

2025-08-05How to resolve signal imbalance issues on an RF power divider

Signal imbalance may be caused by loose or poor connections....

2025-08-04How to Optimize Port Isolation on an RF Power Divider

Relying on sophisticated structural design, the internal transmission paths of the RF power divider must be precisely laid out to ensure even signal distribution at branching nodes...

2025-08-04How to Optimize Port Isolation on RF Power Dividers

Optimizing internal structural design is key to improving port isolation. Signal paths for each port must be rationally planned to avoid crossing or excessively close paths, thereby reducing electromagnetic coupling between ports. Isolation barriers can be added between ports...

2025-08-02How to Effectively Test the Power Capacity of an RF Power Divider

Establish a suitable test environment and ensure that the test site is free of strong electromagnetic interference to avoid affecting the accuracy of test results...

2025-08-02How to Select an RF Power Divider for a Specific Frequency Range

Different RF power dividers have specific effective operating frequency bands, which need to be matched to the frequency range of the signals in your system...

2025-08-01What are the correct installation steps for a high-power coupler

When operating at high power, high-power couplers tend to generate strong electromagnetic fields....

2025-08-01What are the correct installation steps for a high-power coupler

preparation. First, inspect the high-power coupler's exterior to ensure it is in good condition and that there are no damage to the casing or deformed connectors...

2025-07-31How to Fix Signal Attenuation in a High-Power Coupler

First, check the connections for abnormalities. Signal attenuation is often caused by loose connectors or poor contact....

2025-07-31Key Application Considerations for High-Power Couplers in 5G Base Stations

5G base stations transmit high signal power, requiring high-power couplers to stably handle high-power signals to avoid performance degradation or damage due to power overload...